C.T.M. HS-320 Manuel d'utilisateur télécharger pdf (Page 24)

User's ManualHS-6500

Annual Maintenance

We recommend that the chair has at least one full service per year from an authorized

dealer.

This will ensure that your power chair is functioning properly and also helps

prevent future complications. This should include:

1. Checking the tires.

2. Checking the batteries and terminals.

3. Checking the controller program for the user's needs.

4. Checking the frame.

5. Checking the upholstery condition.

Regular Maintenance and Cleaning

1. Avoid knocking or bumping the controller, especially the joystick.

2. Avoid prolonged exposure of your power chair to extreme conditions, such as heat,

cold, or moisture.

3. Keep the controller clean.

4. Check that all controller connectors are tight and secured properly.

5. Never hose off

your power chair or place it in direct contact with water.

6. Keep the upholstery and frame clean by wiping with a soft cloth, particularly after

driving through wet, sandy or muddy conditions. Do not use harsh abrasive materials

when cleaning. Do not apply liquid cleaners or solvents directly to the control box,

battery charger or any electrical connections.

7. Keep wheels free from lint, hair, sand and carpet fibres.

8. Lightly oil axle pin, wheel axles and bearings once every three months, if necessary.

9. Inspect the tires. Tread depth should not be allowed to drop below 1/16".

10.

Use only recommended batteries and have batteries changed by Qualified Dealer if you

have doubts about your ability to lift the components.

11. Charge batteries regularly. Make sure the charger lead plugs are engaged properly

in the sockets. Do not disconnect by pulling the cord.

12. With the controller turned off, check the joystick. Make sure it is not bent or damaged

and that it returns to the center when you release it. Check the rubber boot around

the base of the joystick for damage. Visually inspect the boot. Do not handle or try

to repair it. See your authorized dealer for any questions.

13. Visually inspect the controller harnesses. Make sure that they are not frayed, cut or

have any wires exposed. See your authorized dealer if there is a problem with any

of these harnesses.

14. Ensure that all parts of the controller system are securely fastened to your HS-6200.

Do not over tighten any screws.

MAINTENANCE, AND CLEANING

An electric wheelchair needs some basic attention to ensure it provides reliable service.

We recommend that the user ensures that the power wheelchair is checked regularly for

maintenance requirements and receives a thorough, annual maintenance check up.

1 2 ... 19 20 21 22 23 24 25 26 27

Commentaires sur ces manuels

Pas de commentaire

C.T.M. HS-320 Manuel d'utilisateur Page 24

Commentaires sur ces manuels

Produits connexes et manuels pour Scooters C.T.M. HS-320